Get Up to 40% OFF New-Season Styles
* Limited time only.
Shop Fox 34 in. 5-Speed Floor Radial Drill Press with 5/8 in. Chuck Capacity
Shop Fox W1670 features 1/2 HP motor with 5 speed settings
Comes with 2-year manufacturer’s limited warranty
Horizontal-sliding headstock can be tilted 90° left or right
Shop Now Pay Later, It's Easy - Simply Lease to Own.
est. $45.00 /week*
- Details
- Additional Information
- Specifications
Description
About This Product
The Shop Fox W1670 34″ Floor Radial Drill Press boasts a 1/2 HP motor that smoothly powers the five spindle speeds ranging from 550 to 3000 RPM. The headstock can be tilted 45° left, 90° right, and slid forward or backward over the column allowing you full adjustability. To make sure that you get the best use of the 9-3/4″ diameter table. The drill press features rack-and-pinion elevation controls-adjustable 24-1/2″ vertically, 90° tilt (left and right), and is capable of 360° rotation around the column. The W1670 can easily drill holes through plastic, fiberglass, and composites, and has a maximum capacity to drill through a half inch of steel without bogging down. The JT33 keyed drill chuck is fitted to the JT-33 spindle taper and offers up to 3-1/4″ of travel. The chuck accepts drill bits from 1/16″ to 5/8″. You can set the adjustable threaded depth stop for predetermined and repeatable drilling.
About This Product
Motor: 1/2 HP, 110-Volt
Swing: 33-1/2 in.
Drill chuck: 1/16 in., 5/8 in.
Arbor: JT-33
Spindle travel: 3-1/4 in.
Range of speeds: 550 RPM to 3470 RPM
| Manufacturer | Other Brands |
|---|
