Dannmar Low-Rise Lift 6,000-lbs Capacity

The DLR-6 is collapsible down to just 4 in. This low profile allows lowered cars, sport sedans, vehicles with spoilers, and of course up to light trucks and SUVs. No need to get out a floor jack or have 2 of your crew try to raise the suspension by hand as you drive over the lift.

Electric/hydraulic power system

Multi-position safety locks

Rubber lifting blocks included

Dropped cross bar for added clearance

Heavy-duty steel channel frame

13 positive locking positions are spaced every 4 in.

Secondary slack-cable lock system assures instant back-up safety lock engagement in the event of a cable failure

Exterior steel sleeves with UHMV slides surround each column to ensure positive contact and containment

Welded-steel runways feature utility rail for jack tray and drip trays and other accessories

Built-in flow restriction integrated into the hydraulic cylinder to prevent free-fall

Oversize baseplates and pull-perimeter cross tube sleeves reduce lateral movement and sway when lift is free-standing

Low-profile runways are only 5 in. H to accommodate low ride-height vehicles

Hardened steel safety lock linkages use 3/8 in. molded carbon steel rod ends to reduce flex and twist to ensure positive locking and smooth operation

Precision, reinforced rod ends with spherical bearings are protective coated for corrosion resistance and are designed to provide low friction and high wear resistance

5/8 in. thick top caps

Pull out tire stops on both ends of the lift that allows drive through capability