Dayton Audio DSP-408 4×8 DSP Digital Signal Processor for Home and Car Audio, DSP-408

Description

DSP (Digital Signal Processor) with EQ Crossovers, Time Alignment, and Mixing can be used for home or car audio right out of the box Frequency response: 20 Hz to 20 kHz for faithful sound reproduction Real-time signal processing for ultimate control Complete audio customization for application-specific installations Easy-to-use Windows®-based GUI (Graphical User Interface) – easily controlled via a Windows® application developed by Dayton Audio® featuring all the tools you could need to make your audio system sound its very best Software features – 10-band parametric equalizer per channel; high- and low-shelf EQ per channel; variable crossovers: high/low/band-pass slopes 0 – 24 dB; Linkwitz Riley/Butterworth/Bessel; time delay: 0 to 277 cm or 8.1471 ms adjustable in 1 cm steps; input/output mixing to customize signal path; phase adjustment; customizable name/ID for each preset; minimum/maximum voltage protection; load, save, recall, or delete preset files; software controllable level attenuation on the preamp and high-level inputs; reverse voltage protection; and mute circuit and delay Android™ and iOS™ app – connect to your mobile device using the optional Dayton Audio® DSP-BT4.0 Bluetooth® dongle (sold separately) to completely tune your DSP via the mobile DSP-408 app Inputs – 4 RCA preamp inputs, 4 channel high-level inputs, 1 USB B for PC control, 1 USB A for DSP-BT4.0 Bluetooth® dongle connection, 1 RJ11 for DSP-NRC remote connection, and one 12-volt DC power input jack Outputs – 8 RCA preamp outputs with fully adjustable 10-band parametric EQ Optional Dayton Audio® DSP-NCR wired remote available (sold separately) Dimensions: 6.53 in. W x 1.02 in. H x 4.55 in. L 5-year limited warranty Includes 1 DSP-408 processor, 1 power adapter (12 volts, 1.5-amps), 1 high-level/power input harness (16 pin), 1 USB A to B cable, 2 mounting brackets, 4 mounting bracket machine screws, 4 mounting screws, 4 rubber cushion pads, introduction card, and user manual
DSP (Digital Signal Processor) with EQ Crossovers, Time Alignment, and Mixing can be used for home or car audio right out of the box Frequency response: 20 Hz to 20 kHz for faithful sound reproduction Real-time signal processing for ultimate control Complete audio customization for application-specific installations Easy-to-use Windows®-based GUI (Graphical User Interface) – easily controlled via a Windows® application developed by Dayton Audio® featuring all the tools you could need to make your audio system sound its very best Software features – 10-band parametric equalizer per channel; high- and low-shelf EQ per channel; variable crossovers: high/low/band-pass slopes 0 – 24 dB; Linkwitz Riley/Butterworth/Bessel; time delay: 0 to 277 cm or 8.1471 ms adjustable in 1 cm steps; input/output mixing to customize signal path; phase adjustment; customizable name/ID for each preset; minimum/maximum voltage protection; load, save, recall, or delete preset files; software controllable level attenuation on the preamp and high-level inputs; reverse voltage protection; and mute circuit and delay Android™ and iOS™ app – connect to your mobile device using the optional Dayton Audio® DSP-BT4.0 Bluetooth® dongle (sold separately) to completely tune your DSP via the mobile DSP-408 app Inputs – 4 RCA preamp inputs, 4 channel high-level inputs, 1 USB B for PC control, 1 USB A for DSP-BT4.0 Bluetooth® dongle connection, 1 RJ11 for DSP-NRC remote connection, and one 12-volt DC power input jack Outputs – 8 RCA preamp outputs with fully adjustable 10-band parametric EQ Optional Dayton Audio® DSP-NCR wired remote available (sold separately) Dimensions: 6.53 in. W x 1.02 in. H x 4.55 in. L 5-year limited warranty Includes 1 DSP-408 processor, 1 power adapter (12 volts, 1.5-amps), 1 high-level/power input harness (16 pin), 1 USB A to B cable, 2 mounting brackets, 4 mounting bracket machine screws, 4 mounting screws, 4 rubber cushion pads, introduction card, and user manual